Customer Reviews of SuperPro Brand Parts

Don't take our word for it. See what other customers are saying about SuperPro Suspension Brand Parts.

SuperPro Suspension Parts offer a lifetime warranty, but a lifetime warranty doesn't mean anything unless you're happy with the parts. We dont want you to take our word for it that they're excellent parts, just read the reviews below to see for yourself. Folks that have spent their hard earned cash on a part are going to let you know if a part lets them down. EVERY review we have for a SuperPro Suspension Part can be found below. If you're not convinced that SuperPro is the brand for you, we think these reviews might change your mind. When you've had enough convincing,start here to find the SuperPro Suspension Parts for your vehicle.

Reviews Breakdown - 317 Reviews

5 Star (304)

: 96%

4 Star (9)

: 3%

3 Star (2)

: 1%

2 Star (2)

: 1%

1 Star (1)

: 0%

Rear Beam Axle Pivot Bushings

“Very good”

These are wonderful I have a 2013 Hyundai Elantra and I had issues of the rear end walking about when cornering and I didnt want to just get stock bushing but I didnt want something that would mess up ride quality these are the best of both worlds they make the car handle much better and bumps feels amazing with these and they are very easy to install over great products.

Conner Stevens - March 4, 2024. - 5 out of 5

Front Upper Control Arm Bushing - Inner Front Position

“Great product”

Easy to install.

Bernard Scott Jr - May 12, 2022. - 5 out of 5

Front Upper Control Arm Bushings - Inner rear

“Great product”

Easy to install.

Bernard Scott Jr - May 12, 2022. - 5 out of 5

Front Upper Control Arm Bushings - Inner rear

“Great product”

Easy to install.

Bernard Scott Jr - May 12, 2022. - 5 out of 5

Front Upper Strut Mount w/ Bearing

“Review 1 Year Later”

They are working just as described. No problem at all. I highly recommend them.

Lawrence Drayton - May 2, 2022. - 5 out of 5

Front Strut Mount with Bearing

“Review 2 Years Later”

These mounts were high quality and I have had zero issues with them in two years and about 12000 miles. At 45K miles the stock mounts had crushed down about 1/4" and 5/16" on passenger and driver side respectively. The strut bolts/caps were starting to lift up and a gap was created. Installation was relatively easy and these fixed the problem with the gap and tightened the suspension back up.

James Brant - April 24, 2022. - 5 out of 5

Front Lower Control Arm Bushings - Inner Position

“I was happy to find these for my beloved classic. Easy online purchasing, fair price, and prompt delivery.”

Much better than the stock oem bushing. Different fit but still a direct replacement. I really liked your installation videos. Thanks

Mark crossman - April 21, 2022. - 5 out of 5

Front Upper Control Arm Bushing - Inner Position

“Quality part, superior replacement for the hard to find oem part”

This fits Jensen Healey 72-76. Fairly priced, easy online ordering and prompt delivery.

Mark crossman - April 21, 2022. - 5 out of 5

Front Steering Rack and Pinion Bushing

“Review 2 Years Later”

Held up good untill I had an accident smashing left driver side.

Jurrelle Smith - March 28, 2022. - 5 out of 5

Front Steering Rack and Pinion Bushing - Power Steering

“Good condition.”

Installed these with the rack in the vehicle. The vehicle has 220,000 miles on it. This job takes some skills and several tools. An air chisel/hammer makes the difference. Some pointers:\nFollow the instructions to remove the worn bushings, the bottom bushings can be removed with chisels as instructed. The tires must be off the ground to be able to lift the rack enough to pull the bushings from underneath. Definitely a job that requires some time, some manual dexterity, and patience, but the unit is repaired and no alignment is required. Good Luck.

Anthony King - March 18, 2022. - 5 out of 5

Superpro SPF0333K

“great looking boots”

High quality product. Fast shipping. Highly recommend.

geordie sasyniuk - March 14, 2022. - 5 out of 5

Universal Dust Boot

“great looking boots”

High quality product. Fast shipping. Highly recommend.

geordie sasyniuk - March 14, 2022. - 5 out of 5

Front Motor Mount Bushings

“Review 2 Years Later”

Car spends a lot of time (2-3 days a week in the summer) at the drag strip and getting beat on and the mounts are holding up well!

Timothy j cox - March 13, 2022. - 5 out of 5

Front Control Arm Lower - Inner Bushing

“Good product”

Fits perfectly.

Feber Ost - March 8, 2022. - 5 out of 5

Front Lower Control Arm Bushings - Inner Rear Position - Offset

“Review 2 Years Later”

Overall the control arm bushings have held up very well. Initially, I had the driver side bushing slip out. I applied some stud and bearing mount when I replaced it and have had no further issues. The car is a dedicated autocross car and doing about 30 events per year, frequently with 2 drivers using sticky 285/30/18 Hoosier A 7 tires. The bushing have been subjected to a lot of abuse and have held up well.

Francis Miller - March 4, 2022. - 5 out of 5

Front Lower Control Arm Bushing - Inner Position

“Very good”

Bushings were pressed on easier when warmed up. Fit perfectly on my front lower control arms on 1985 corvette

Jim Ruppel - March 3, 2022. - 5 out of 5

Front Steering Rack and Pinion Bushing

“Review 1 Year Later”

I am very happy with these steering bushings and how they have tightened up steering feel. After having them on my truck for a year I have had zero issues with them and definitely recommend them anyone driving a Nissan Frontier

Jake Palm - January 29, 2022. - 5 out of 5

Front Differential Mount Bushings

“Great Quality”

Upgraded from my Moog Rubber bushings to these, no additional road noise as some will claim. The ride was much smoother and felt very solid.

Taylor Welsh - January 27, 2022. - 5 out of 5

Rear Leaf Spring and Shackle Bushings

“Review 1 Year Later”

I couldnt be happier with this set of PU bushings. I think SuperPro is the best. One year later I have punished these bushings in the desert for many miles. I dont notice any wear. On top of that, I appreciate the installation support I received from suspension.com. Im actually now considering replacing my entire leaf pack and in that case, I will order another set of these same SuperPro bushings to install in the new leaves prior to installing them on my truck.

Caleb Ruth - January 13, 2022. - 5 out of 5

Front Sway Bar Endlink Bushings

“Review 1 Year Later”

The vehicle has only been test driven on flat terrain so far. I hope to put in service in spring and will then know how the sway bar bushings work out. Thank you.\n

THOMAS MCGEE - December 27, 2021. - 5 out of 5

Sway Bar Bushings - 21 mm (0.82 Inch) - Measure Bar Diameter

“Review 1 Year Later”

These bushings have held up perfectly for a year. Installation was an easy process with perfectly fitting parts and the included grease. Its great to be able to find these performance parts for an old Toyota Tercel Wagon still.

Andrew Underwood - December 27, 2021. - 5 out of 5

Universal Sway Bar End Link Kit - Adjustable 245-305mm - 10mm Ball Joint End

“Review 2 Years Later”

2 years in and 17 thousand kilometers and the parts are still in great shape. I am in Canada, where the winter roads are salted. Each fall, I spray oil over the suspension parts along with these end links. They have help up well with this process and show no signs of rust.

Lonny Mah - December 15, 2021. - 5 out of 5

Front Sway Bar Bushings - 29 mm (1.14 Inch) - Measure Bar Diameter

“Excellent”

Great product, first time purchased, fit exactly thank you.

Luis Samuel Duarte Martinez - December 8, 2021. - 5 out of 5

Front Shock Absorber Upper Bushing

“Excellent product”

Great product, first time purchased, fit exactly thank you.

Luis Samuel Duarte Martinez - December 8, 2021. - 5 out of 5

Front Lower Control Arm Bushings - Front Position

“Review 1 Year Later”

Good day, funny enough I was changing my winter tires over and took a look at the bushings to see how they are holding up and they look perfect, I drove 35000km on them this last year, thanks again for a reliable product.

Oliver Carter Wells - December 1, 2021. - 5 out of 5

Front Steering Rack and Pinion Mount Bushings - Power Steering

“Great quality and fit”

Shipping was quick, and the product was great.

Gabriel Roth - November 19, 2021. - 5 out of 5

Front Lower Control Arm Bushing - Inner Rear Position

“Excellent quality”

This bushing is much smoother and the steering is much more direct than either the stock bushing or the previous polyurethane bushing that failed. The construction is excellent and high precision. The previous bushing was soft enough to allow enough vertical motion to create knocking on certain rougher roads. These are dead silent- both sets were tightened to spec, 172 ft-lbs. The next time I buy bushings, I am buying SuperPro.\n\nBut be warned: installing this bushing is very difficult with the strut left in place. The range of motion is slightly less than stock and much stiffer and really can only be slid in from the front and not the side. You may as well replace the strut bearing while you replace these. Also, you may find that the control arms, which are low precision stamped parts, are not nearly as round as the bushing, which is a tight press fit. Follow the instructions and remove all the paint to bear metal.

Remy N Seman - November 5, 2021. - 5 out of 5

Front Strut Mount with Bearing

“Review 2 Years Later”

Started to squeak. Editors Note: You would need to remover the bushing and re-grease them. When reassembling them grease the bushing everywhere they touch metal. Ensure the are correctly installed and torqued to the correct OEM specs.

Paul mendez-molina - October 22, 2021. - 2 out of 5

Front Motor Mount Bushings

“Review 2 Years Later”

Still hanging in there after 2 years. The motor theyre holding down is a high torque mill in a heavy machine and they are doing ok so far.

James Sunderland - October 4, 2021. - 5 out of 5

Front Strut Mount with Bearing

“Review 2 Years Later”

Seems fine! In my 2004 Pontiac GTO, but I only drive it a few times a month.

Anthony Curro - October 4, 2021. - 5 out of 5

Front Differential Mount Bushings

“Review 1 Year Later”

Great parts 100 times better than original Jeep parts.

Ather Naeem - October 2, 2021. - 5 out of 5

Front Radius Arm Assembly with Bushings

“Very nice quality, no increase in NVH”

Installed TRC1000, TRC1001, Whiteline poly strut bushings and new GXP struts front and Monroe gas magnums out back on my G8 GT. The ride and handling are great. No more rattles from the suspension. No more wallowing around corners. Steering is accurate and neutral. Love it.

Ron - October 1, 2021. - 5 out of 5

Front Lower Control Arm Bushing - Inner Front Position

“Review 2 Years Later”

Parts fitment for a 2007 Honda Fit (GD3) is no issue, its a bit tricky to get the one-piece urethane in the arm but still pretty simple (much preferred over two-piece designs). My Fit uses large brakes and 245 width front tires these bushings are designed for OEM plus level of performance.

FERNANDO SOSA - September 22, 2021. - 3 out of 5

Front Upper Control Arm Bushings - Inner

“Excellent - fit and installed perfectly”

The 1989 Honda Prelude upper control arm bushings were "impossible" to find -- until I found these. Great bushings got my car handling beautifully again!

Perry Eury - September 8, 2021. - 5 out of 5

Rear Leaf Spring Bushing - Rear Position

“Very good parts”

Fit exactly on my car. Very happy with that part.\n

Yann Martinello - September 2, 2021. - 5 out of 5

Front Upper Control Arm Bushing - Inner Position

“Review 2 Years Later”

The bushings are in good shape after 2 years, so i would say they are a quality product!

FERNANDO SANCHEZ - August 29, 2021. - 5 out of 5

Rear Sway Bar End Link Kit - Adjustable 125-145mm - 12mm Ball Joint End

“Definite improvement vs OEM end links”

So far impressed with the quality of workmanship of the product. Front end links replaced the OEM of the 2020 Kia Stinger GT2 and with the upgrade of the front sway bar, this makes an overall complete package of the front suspension.

Luke Howard - August 15, 2021. - 5 out of 5

Front Sway Bar End Link Kit - Adjustable 300-345mm - 12mm Ball Joint End

“Definite improvement vs OEM end links”

Luke Howard - August 15, 2021. - 5 out of 5

Front Steering Rack and Pinion Bushing - Manual Steering

“Would be better if your online site gave dimensions and sizes of your parts.”

Was unable to install this part because it was the incorrect size. The rack and pinion that I have are unknown what type it is. The inner shaft of my rack and pinion is 1 3/16 in diameter. The information on your website does not give dimensions of the part but rather requires year make and model. Editors Note: None of our Polyurethane manufacturers list the dimensions for their bushings. So we do not have the dimensions listed on our web pages. If the dimensions are listed competing companies could easily copy the bushing and sell it.

Michael Sprock - August 15, 2021. - 5 out of 5

Universal Sway Bar End Link Kit - Adjustable 210-260mm - 10mm Ball Joint End

“Easy”

Very easy to install.....lowered my Pontiac Vibe GT and had installed a thicker sway bar....the stock end links kept the sway bar down too far and pre loaded which felt awful........installed these, dropped it back to the ground, made the adjustment to no pre load and tightened them down.

BRANDON AGNEW - August 13, 2021. - 5 out of 5

Front Steering Rack and Pinion Bushing

“These bushings to me are better than the stock”

Went in like a dream, tight no play. Rack and pinion have no slack now.

Jarid Cummings - July 31, 2021. - 5 out of 5

Front Rack and Pinion Mount Bushing

“Review 1 Year Later”

Still tight in the front.

Nathan Cook - July 19, 2021. - 5 out of 5

Front Steering Rack and Pinion Mount Bushing - Power Steering

“Tightened Up My Steering”

Not too bad to install, made a noticeable difference in steering feel and responsiveness. Old bushings can be removed without pulling the rack completely, if youre brave enough with an air hammer.

Kyle A Mandes - June 28, 2021. - 5 out of 5

Front Lower Control Arm Bushing - Inner Rear Position - Single Offset

“Review 6 Months Later”

These bushings came with ample grease to lubricate the mating surfaces. Stiffer than the OE rubber bushings there is a more firm ride. I am confident they will last the life of the vehicle. I was able to get the alignment caster within factory specification, (although another method may have worked without using the offset bushing).

JESSE CHEN - June 25, 2021. - 5 out of 5

Front Steering Rack and Pinion Bushings

“These are great!”

These bushings were super easy to install. I loved how they provided the assembly grease as well. It made the whole job so easy. Only took me about 30 minutes to take out the old bushings and get these new ones in here. As for steering response, nothing changed really, nothing noticeable, at least for me. But theres no movement in the rack and thats exactly what I wanted. I definitely recommend these to anyone who would like some nice-looking bushings and the benefit of having them. I daily drive my is300 and these are great!

Carlos Floriano - June 22, 2021. - 5 out of 5

Front Sway Bar Bushings - 27 mm (1.06 Inch) - Measure Bar Diameter

“Good fit.”

Item as described.

Alonso Hernandez - June 13, 2021. - 5 out of 5

Front Upper Trailing Arm Bushings

“Review 1 Year Later”

Hi, there the tj jeep is off road around 95% of the time, we go out around 2x a month. The bushing still looks ok thanks.

k hardy - June 5, 2021. - 5 out of 5

Front Lower Control Arm Bushings - Inner Rear Position

“Really good very fast shipping Im in Cali and it was here a day earlier than expected”

You have to be careful with the installation on this, one of my plastic covers came off and it was almost impossible for me to keep the spherical bushing straight. Once installed Made my steering more responsive tighten up the steering. Highly recommend an alignment afterward currently running -3 and -2 camber in my car.

Orison Elster - May 10, 2021. - 5 out of 5

WPGrease Polyurethane Bushing Lubricant and Prelube - 3 Pack

“Definitely a must for ease of installing your parts”

I combined this with dry ice and you can literally push ur bushing in by hand.

Orison Elster - May 10, 2021. - 5 out of 5

Front Lower Control Arm Bushings - Inner Front Position

“Very well manufactured easy to install”

Made my steering more responsive tighten up the steering. Highly recommend and alignment afterwards currently running -3 and -2 camber in my car and it feels get on the rotation.

Orison Elster - May 10, 2021. - 5 out of 5

Rear Panhard Rod Bushing

“Review 1 Year Later”

These Panhard Rod bushings are critical components for improving a vehicles lateral response. Due to the location of the Panhard Rod in vintage 124 Spiders, these stiffer bushings improve the OEM rear suspension lateral steer compliance without hurting the ride. That said, on large dips you may notice a slight lateral motion of the rear of the vehicle due to the arc traversed by the Panhard Rod as the suspension travels through jounce and rebound. Good suspension damping is important to the system as well.

Kenneth D Norman - May 9, 2021. - 5 out of 5

Front Steering Rack and Pinion Mount Bushings

“Review 2 Years Later”

They held up pretty well.

Jacob Charlie - May 8, 2021. - 5 out of 5

Front Idler Arm Bushings

“Parts are of high quality and fitment was perfect”

Excellent quality and service was great. I was contacted by phone to let me know the shipment was going to be delayed, but it actually showed up earlier than expected.

Spero Floro - May 8, 2021. - 5 out of 5

Motor Support Bushing

“Great”

I installed bushings by hand. Burnt out old rubber, cleaned up inner shells, and pressed new bushings in with a large C-Clamp. Bushings are exactly what I needed for my build. Keeps the engine steady and no more tearing rubber engine mount bushings. Great bushings 5/5 on quality.

Dwaine - May 2, 2021. - 5 out of 5

Front Steering Rack and Pinion Mount Bushings

“Great part good quality”

Fit like OEM.

John Ramoutar - April 1, 2021. - 5 out of 5

Front Motor Mount Bushings

“Product looks robust and fitment was perfect”

Rate these 10 of 10.

RON HIGHT - April 1, 2021. - 5 out of 5

Rear Sway Bar End Link Kit - Adjustable 125-145mm - 10mm Ball Joint End

“Amazed by the quality of this product”

I had no issues installing them. The articulation of the ball joints was very good. Overall an amazing product. Lightweight too, compared to others on the market. Airtight packaging gives the customer peace of mind, compared to how other end links are sold.

Neil Dsouza - March 31, 2021. - 5 out of 5

Front Steering Rack and Pinion Mount Bushings - Power Steering

“Review 1 Year Later”

These bushings made a world of difference on our race car. The steering feels very responsive and gives clear feedback. Highly recommend!

Michael Loehr - March 19, 2021. - 5 out of 5

Front Steering Rack and Pinion Bushing - .Power Steering

“Great product.Been an auto mechanic for 35 plus years.”

You cant go wrong getting this part, went on really easy. It is better than the original. The salesperson was very friendly and knowledgeable. Part arrived in time.

Haniff Hosein - March 13, 2021. - 5 out of 5

Front Steering Rack and Pinion Bushing

“Great fit, Exactly What I needed”

Ok Ill be honest, I chickened out at this job. I thought I could do it but, the giant bolts that hold my Power Steering rack on are no Joke. So I paid a garage to install them. They said the kit was great and it went together without any issue! Steering is back nice and snug and no more rattle in the steering.\nThank you, amazing service, and amazing company. Your service is amazing, crazy fast shipping, super after sales support, and International Shipping. I will be back for more parts!!!

Evan Norris - February 28, 2021. - 5 out of 5

Front Control Arm Lower Rear Bushing

“Review 2 Years Later”

Bushes still perform as when newly fitted 2 years ago.

Edward Zammit - February 27, 2021. - 5 out of 5

Front Sway Bar To Lower Control Arm Kit

“Review 1 Year Later”

The parts fit and are working great. \n

Thomas Haertle - February 23, 2021. - 5 out of 5

Front Differential Mount Bushings

“Review 1 Year Later”

After one year theyre still holding strong!! Very Happy.

Jason Andrews - February 17, 2021. - 5 out of 5

Rear Upper Trailing Arm Bushings

“Review 1 Year Later”

Your Product is A-Frickin Mazing!! The independent rear suspension in my Dodge Challenger had taken on a mind of its OWN!! It was SCARY if you tried to take a curve at high speed!! Suspensions bushing kit STOPPED that DEAD in its tracks!! Corners like a race car now!! BETTER than the day I bought that dang car!! I am pleased and impressed with the performance!!

Ross Kallenberger - January 29, 2021. - 5 out of 5

Universal Sway Bar End Link Kit - Adjustable 245-305mm - 10mm Ball Joint End

“Review 1 Year Later”

Awesome product and performs very well! Great upgrade for my Toyota.

Christopher cuevas - January 25, 2021. - 5 out of 5

Rear Spring Seat Bushing

“Quality product”

Quality product just as expected from SuperPro.

chris reinacher - January 19, 2021. - 5 out of 5

Front Strut Mount with Bearing

“Great product”

Used by many I know for the Pontiac G8 SuperPro makes some of the best suspension products available, these included.

chris reinacher - January 19, 2021. - 5 out of 5

Rear Toe Control Arm Bushings

“Review 1 Year Later”

They work great ! Really stiffen up the chassis.

Collin Robertson - January 17, 2021. - 5 out of 5

Front Strut Arm Bushings

“Super easy once you get the old one out.”

Pressing the new one in was easy once the old one was off. Also the center dowel is tapered took me a second to figure that out . Use lots of grease that comes included to avoid noise.

Victor I Perez - January 10, 2021. - 5 out of 5

Superpro SPF0333K

“Excellent quality parts.”

These parts were modified and fitted to the rear shock ball joint mounts on a 1999 Bentley Arnage to replace damaged dust boots. They have functioned perfectly since fitting and saved the purchase of expensive OEM parts.

Geoffrey Moore - January 10, 2021. - 5 out of 5

Front Lower Control Arm Assembly

“Review 1 Year Later”

One of the control arms had a cut in the ball joint boot. I contacted Super Pro and they sent me a replacement control arm. Very good customer service from Super Pro.

Richard Wilson - January 7, 2021. - 5 out of 5

Front Lower Control Arm Bushings - Rear

“Review 1 Year Later”

Replaced bushings and they are great unlike the cheap ones you can buy and make weird noises these are super quiet and still holding up very well. Definitely recommend these.

Mark Baires - December 9, 2020. - 5 out of 5

Front Motor Mount Bushings

“Review 2 Years Later”

Still working as new.

H Ambush - December 7, 2020. - 5 out of 5

Rear Sway Bar - 27mm - Heavy Duty

“Great upgrade for the loaded up 100 series / lx470”

SuperPros rear sway bar kit is fantastic upgrade for folks with modded 100 series / LX470. My truck has drawers and rear steel bumper and the handle was improved with this installed compared to my tired stock bars. I do recommend if your truck is lifted to also get extended sway bar links. The bushings fit right into the OEM brackets. The blue powder coating has held up fine. Unlike my TJM front sway bar which has flaked already in a few spots. The TJM bushings did not want to stay in place when using the TJM supplied bushing bracket. Switching back to OEM front bracket fixed this issue.

Christopher Lam - November 24, 2020. - 5 out of 5

Front Upper Strut Mount w/ Bearing

“Great strut mounts”

I love SuperPro use their bushings for everything they have a great lifetime warranty with no hassle and the fact that suspension.com has them is great you used to only get them from higher priced places plus quick shipping you cant go wrong great place to do business.

Harold Bernard - November 24, 2020. - 5 out of 5

Front Steering Rack and Pinion Mount Bushings

“Review 1 Year Later”

The replacement parts installed with no problem and performs as stated.

Robert Johnson - November 18, 2020. - 5 out of 5

Front Steering Rack and Pinion Bushing

“Review 2 Years Later”

The bushings are working well! Thanks for checking.

Michael J Lowe - November 16, 2020. - 5 out of 5

Front Lower Control Arm Bushing - Inner Rear Position - Single Offset

“I like the quality”

My only issue was there was no explanation for the difference between single and double offset so I assumed double was just more offset the the single. Now that I got the part I realize I only have offset on one bushing. So now I have to buy another set to even put both sides.

Dallas gillingham - October 29, 2020. - 5 out of 5

Front Steering Rack and Pinion Bushings

“Fit perfectly”

Easy to install and definitely feel a big difference in the steering. I recommend these to anyone in the market for a set thanks for the awesome product guy keep up the good work.

Luis A Ferrer - October 20, 2020. - 5 out of 5

Universal Sway Bar End Link Kit - Adjustable 210-260mm - 10mm Ball Joint End

“Easy”

BRANDON AGNEW - October 15, 2020. - 5 out of 5

Front Steering Rack and Pinion Mount Bushings - Power Steering

“Theyre probably awesome”

Im sure theyre excellent but my 30 year old Miata is so clapped out I cant tell anything resembling a difference. If your car isnt a piece definitely buy these though. lol

Brian Lennon - October 14, 2020. - 5 out of 5

Front Lower Control Arm Bushings - Front Position

“I was warned that the ride would feel hard. They were wrong, it feels great.”

Cornering is more confident and the bumps are have the feel of a 99 BMW M3.

Clive McCalla - October 2, 2020. - 5 out of 5

Universal Dust Boot

“Very good”

For a home DIYer, and I imagine most folks, its a little difficult finding the proper size. I know these are meant to be universal to cover many different joints by size, I did notice there were some...empty size areas when looking and I highly recommend having a digital caliper for accurately measuring the size you need. You definitely want something slightly smaller to ensure a snug fit to hold grease in and debris out. Beyond that they seem well made, flexible but not as porous as the stock rubber joint covers that come with most parts and I think thats due to the material used. This will allow more use over longer periods without breakdown like the rubber boots tend to do.

William parker - September 24, 2020. - 5 out of 5

Front Coil Spring Spacer Bushing

“good”

Havent had any issues. Still holding up.

David Funderburg - September 17, 2020. - 5 out of 5

Rear Sway Bar Bushings - 19 mm (0.75 Inch) - Measure Bar Diameter

“Great product”

Very well made bushing. Came in clutch for my 01 GS300 with an upgraded 19mm Megan rear sway bar.

Luiz Gonzalez - September 15, 2020. - 5 out of 5

Front Differential Mount Bushings

“Awesome bushings!!”

Would highly recommend them. This is my second set as I am changing out diff and cant get them out. No worries though. They are well worth the money and by the way they do fit 06-10 jeep commander as the 05-10 grand cherokee has the same diff and mounting points. I am using them on a 2008 commander. Just Sayin:o)

Jow - September 5, 2020. - 5 out of 5

Front Steering Rack and Pinion Mount Bushings

“top quality”

I love SuperPro will use all there bushings.

yasser abbady - August 31, 2020. - 5 out of 5

Front Lower Control Arm Bushing

“Review 2 Years Later”

I am very happy with the products to date!

michael mills - August 30, 2020. - 5 out of 5

Rear Upper Control Arm Bushing - Front and Rear Position

“Review 2 Years Later”

I am very satisfied with the products to date!

michael mills - August 30, 2020. - 5 out of 5

Rear Lower Control Arm Bushing

“Review 2 Years Later”

I am very satisfied with the products to date!

michael mills - August 30, 2020. - 5 out of 5

Front Differential Mount Bushings

“Excellent”

The additional NVH Ive heard about when switching to poly bushings is completely un-noticable, and these will outlast the Jeep. Very happy with purchase!

William Stewart - August 22, 2020. - 5 out of 5

Front Strut Mount with Bearing

“Review 1 Year Later”

Car still feels and handle great! Pontiac G8 GT with LS3.

P Tooks - August 15, 2020. - 5 out of 5

Front Sway Bar To Lower Control Arm Kit

“Review 1 Year Later”

Parts are still working great. Thank you for following up.

Jamie Joswick - August 7, 2020. - 5 out of 5

Front Differential Mount Bushings

“Review 2 Years Later”

Still working fine two years later, no issues.

David W Phillips - August 6, 2020. - 5 out of 5

Front Sway Bar - 24mm (0.94 inch) - Heavy Duty - 2 Point Adjustable

“Very satisfied”

Now that we cannot purchase the Heavy Duty Sway Bar from Mazda Speed, I made an order for this product. Works great. This enabled me to renew my record in a speedway that I often visit. Thank you indeed.

Tomonori Yamauchi - July 19, 2020. - 5 out of 5

Rear Differential Bushings - to Crossmember

“Review 1 Year Later”

Excellent quality. Good performance.

Oscar Carrillo - June 20, 2020. - 5 out of 5

Front Strut Mount with Bearing

“WOW, Best Strut Mount Ive seen!!!”

I installed these Polyelast Strut Mounts on my 2005 GTO, and WOW, I was impressed!!!!!\nI am an experienced mechanic, who replaced the original strut mounts several years ago, in the GTO with the GM replacement mounts that failed and sagged almost immediately.\nThese Polyelast Strut Mounts with bearings are extremely well made, and are the best replacement mounts you can buy. Do not waste your money on the plain rubber mounts, these mounts do not sag like the rubber ones.\nThese mounts have made the GTO feel New again, what a great improvement for the front suspension!!!

Nicholas J Macchia - June 12, 2020. - 5 out of 5

Rear Greaseable Shackle Bushings and Hardware Kit

“So AWESOME”

Very well made. Easy to install and cant wait to see how they hold up over time.

Cory Linnenkamp - June 5, 2020. - 5 out of 5

Front Upper Trunnion Bushing

“You need TWO of these for the MG Midget/AH Sprite!!!!!!!”

Nothing wrong with the product itself. These bushings look great. The problem I had is with suspension.coms catalog info. This part is listed as "Upper Trunion Bushings for my MG Midget, which they are not. These are lower control arm bushings for the Midget. BUT, they are apparently also Upper Trunion bushings for an MGB. Therefore, Suspension.com lists the quantity required as 1, which is not the case. Now I have all the other parts ready and am trying to reassemble my front suspension, only to discover I need to order another set and wait!

Jeremy B Morse - May 20, 2020. - 2 out of 5

Front Sway Bar End Link Kit - Adjustable 160-205mm - 12mm Ball Joint End

“Good quality and perfect fit.”

The only thing that could be improved on is, the nuts..afyer 2 weeks of driving, Ive had 1 back completely off and lost it...and a second one was on its way, half way off...Ive replaced all 4 nuts with Nylock locking nuts. And lock tite.

Martin Faller - May 16, 2020. - 4 out of 5

Front Steering Rack and Pinion Mount Bushings - Power Steering

“Awesome, Fast Shipping, Just what I expected.”

Really fast shipping, product was just what I expected. Will use these guys again !

Aaron Sloman - May 10, 2020. - 5 out of 5

Front Steering Rack and Pinion Bushing - Power Steering

“Review 2 Years Later”

Actually they sat in the box for 2 years and I only just installed them last month. The initial result has been great, but have no idea of longevity. Hit me back in 24months and Ill let you know. The instructions could be slightly more helpful with some pro-tips like "locking the steering wheel column before starting the work to eliminate the need for alignment.

Andrew Buckley - May 8, 2020. - 4 out of 5

Rear Panhard Rod Bushing

“Review 1 Year Later”

Kenneth D Norman - May 6, 2020. - 5 out of 5

Front Steering Rack and Pinion Mount Bushings

“Great part good quality”

Fit like OEM.

John Ramoutar - April 24, 2020. - 5 out of 5

Rear Sway Bar End Link Bushings

“Very impressed with the part quality”

The bushing perfectly fit in to my 1999 Toyota LC. All specification were met with equal or better in comparison to the Toyota part. In addition, it took me about 20 minutes to replace the bushings. I highly recommend this part as the first replacement option for the Rear Sway Bar End Link Bushings.

Ariel Garcia - April 21, 2020. - 5 out of 5

Front Steering Rack and Pinion Bushing - .Power Steering

“Great product.Been an auto mechanic for 35 plus years.”

You cant go wrong getting this part, went on really easy. It is better than the original. The salesperson was very friendly and knowledgeable. Part arrived in time.

Haniff Hosein - April 17, 2020. - 5 out of 5

Front Differential Mount Bushings

“Review 1 Year Later”

One year later these bushings are still working great. Ive installed some urethane bushings in the past that have started to harden and rot after a year, not so with these. They are still flexible and show no signs of cracks. Great product!

Jacobus LaFazia - April 4, 2020. - 5 out of 5

Front Lower Control Arm Assembly

“Review 1 Year Later”

They failed already about 3 months ago. Really disappointed with them. Replaced them but kept them. Editors note: SuperPro handles all warranty claims. Gave the information to the customer to start the claim process.

Jason Kluever - March 25, 2020. - 1 out of 5

Rear Control Arm Bushings

“better handling!”

My rear is solid and of course other parts as well.

Ruben Medina Jr - March 17, 2020. - 5 out of 5

Front Steering Rack and Pinion Mount Bushings - Power Steering

“Review 1 Year Later”

These bushings made a world of difference on our race car. The steering feels very responsive and gives clear feedback. Highly recommend!

Michael Loehr - March 15, 2020. - 5 out of 5

Front Differential Mount Bushings

“Great Quality”

Upgraded from my Moog Rubber bushings to these, no additional road noise as some will claim. The ride was much smoother and felt very solid.

Taylor Welsh - February 25, 2020. - 5 out of 5

Front Differential Mount Bushings

“Great Quality”

Upgraded from my Moog Rubber bushings to these, no additional road noise as some will claim. The ride was much smoother and felt very solid.

Taylor Welsh - February 25, 2020. - 5 out of 5

Front Steering Rack and Pinion Mount Bushings - Power Steering

“Review 2 Years Later”

Holding up fine.

Lawrence FLESZAR - February 14, 2020. - 5 out of 5

Rear Differential Pinion Mount Bushing

“Great prroduct”

Product worked like a charm.

Dave Berresford - February 10, 2020. - 5 out of 5

Rear Sway Bar Mount Bushing - 20 mm (0.78 Inch) - Measure Bar Diameter

“Very Satisfied”

I can feel my forester xt is more planted to the road. This is installed with the 20mm sway bar.

DALE O TORRES - February 7, 2020. - 5 out of 5

Rear Sway Bar - 18mm - 3 Point Adjustable

“Excellent product”

Installed this rear swaybar on my 2001 Gs430 and its unbelievable what a tremendous difference this upgrade makes in handling. I used to able to feel the weight of this car when taking corners but now it is much tighter with almost no body roll. IMO this is a must have upgrade period. SuperPro makes some high quality parts and the installation was easy

Yuen Fong - January 27, 2020. - 5 out of 5

Front Differential Mount Bushings

“Review 1 Year Later”

Great!!! Easy to install, great quality product.

Brandon Miller - January 13, 2020. - 5 out of 5

Front Lower Differential Bushings

“Great product!!”

Perfect fit and finish. Pressed old worn out bushing out and this one pressed right in for a perfect fit.

Josh Vaughan - January 8, 2020. - 5 out of 5

Rear Sway Bar Bushings - 14 mm (0.56 Inch) - Measure Bar Diameter

“Very easy to install”

Good quality polyurethane product. The split design made the installation very easy - under 10 mins for both bushings. More than enough grease was supplied with the bushings.

Scott Taylor - December 24, 2019. - 5 out of 5

Front Steering Rack and Pinion Bushings

“Quality product with good design”

The design of the product makes installation very easy without a shop press. I did the installation at home on floor jacks in about 2 hrs. The difficult part was getting the old steering rack bushings out.

Scott Taylor - December 24, 2019. - 5 out of 5

Front Sway Bar Bushings - 27 mm (1.06 Inch) - Measure Bar Diameter

“Very easy to install”

Quality product and very easy to install. Came with installation grease as well.

Scott Taylor - December 24, 2019. - 5 out of 5

Front Steering Rack and Pinion Mount Bushing - Power Steering

“Satisfied!”

All items fit perfect on my 2003 Toyota.

Ritter Ronnie - December 19, 2019. - 5 out of 5

Front Lower Control Arm Bushing - Inner Front Position

“Ihave already used super pro bushings in the past great product .”

Wonderful bushings for the roads in Puerto Rico that are all messed up .

jose aviles - December 9, 2019. - 5 out of 5

Rear Trailing Arm Bushings - Front Position

“Very good product!”

Stronger than stock, almost no difference in ride quality.

DavidFerreira - December 8, 2019. - 5 out of 5

Rear Lower Trailing Arm Bushing

“great product”

Good firm material, easy to install, control of the road is great.

Russell Bass - November 4, 2019. - 5 out of 5

Rear Sway Bar Bushings - 22 mm (0.87 Inch) - Measure Bar Diameter

“Very Good”

Bushings are better than Eibach black ones. Good quality. 2008 wrx 22mm rear sway bar.

Bradford Dempsey - November 3, 2019. - 5 out of 5

Front Sway Bar Bushings - 24 mm (0.94 Inch) - Measure Bar Diameter

“Very Good”

2008 wrx bushing for Eibach Bar kit. Worked Great 24mm front sway bar.

Bradford Dempsey - November 3, 2019. - 5 out of 5

Front Strut Mount with Bearing

“Great quality”

Installed the new bushings while lowering my 2017 SS. Install went great. Driveability is fantastic. No harsh noises. Steering is great. \nNo issues recommending this product.

Aussie Dors - October 24, 2019. - 5 out of 5

Front Upper Control Arm Bushing - Inner Position - Double Offset

“Great!”

Just what I needed thank you.

Kale teixeira - October 23, 2019. - 5 out of 5

Front Strut Mount with Bearing

“WOW, Best Strut Mount Ive seen!!!”

Nicholas J Macchia - September 27, 2019. - 5 out of 5

Front Strut Mount with Bearing

“Review 2 Years Later”

Holding up well.

Dominick Viesta - September 25, 2019. - 5 out of 5

Front Lower Control Arm Assembly

“Review 1 Year Later”

Parts are great holding up amazing love them would highly recommend.

Will Texter - September 17, 2019. - 5 out of 5

Front Lower Control Arm Assembly

“Very good part, easy to install”

I think its a great part, feels 100% better having the caster arms and lower control arms installed. Easy install as well.

Drew Shelton - September 14, 2019. - 5 out of 5

Front Sway Bar Bushings - 20 mm (0.78 Inch) - Measure Bar Diameter

“Review 1 Year Later”

The replacement performance bushing is ordered are still good as new today. The not only stiffened up my suspension, but they got rid of the horrible sway bar bushing squeak that is extremely common on the Audi TT MK1.

Dathan Mathews - September 13, 2019. - 5 out of 5

Front Lower Control Arm Bushings - Inner Position

“Review 2 Years Later”

Ok, we use these on race cars (road course) and they hold position very well without binding the suspension.\nWe only damaged one in a 95mph wall impact.\nWe highly recommend these!\n1991 Ford Festiva B6T 200lb/ft wheel torque, 195 WHP

Ryal Greenwood - September 6, 2019. - 5 out of 5

Front Sway Bar Bushings - 30 mm (1.18 inch) - Measure Bar Diameter

“Perfect fit”

Overall review of this these bushings are top-line.

Roman Acuna - August 30, 2019. - 5 out of 5

Front Steering Rack and Pinion Bushing

“Great quality”

Once again good quality great fit car is running smoother than ever.

Roman Acuna - August 30, 2019. - 5 out of 5

Front Lower Control Arm Bushings - Rear

“Good quality bushings not cheap”

Good quality bushings, not cheap bushings very happy with this purchase top of the line.

Roman Acuna - August 30, 2019. - 5 out of 5

Front Lower Control Arm Bushings - Front Position

“Nice quality bushings perfect fit”

I order these bushings for my early model 1997 Lexus SC300 Perfect Fit quality ride.

Roman Acuna - August 30, 2019. - 5 out of 5

Front Transmission Mount Bushings

“Sweet”

Very sweet.

Gnanin Hettiarachchy - August 25, 2019. - 5 out of 5

Front Sway Bar Endlinks - Heavy Duty - Adjustable

“Perfect heavy duty end links”

The customer service was amazing in ordering my super pro endlinks and they worked perfectly. I was able to easily install them and replace my old worn endlinks. It got rid of my suspension noise and work perfectly on my lowered VW alltrack. I cant recommend this product more. Super heavy duty and amazing materials.

Braydon Walsh - August 19, 2019. - 5 out of 5

Front Lower Control Arm Bushings - Front Position

“Review 2 Years Later”

Worked as expected and is a very nice replacement for the stock rubber bushings. Given these can be in an environment where oil (transmission oil) or grease, water, and salt can be present, the polyurethane type bushing is an excellent long-lasting choice.

Travis B - August 16, 2019. - 4 out of 5

Front Sway Bar To Lower Control Arm Kit

“Review 1 Year Later”

All good.

Tim Greves - August 16, 2019. - 5 out of 5

Front Lower Control Arm Bushings - Front Position

“Review 1 Year Later”

Very satisfied. Heavy crush tube unlike some other bushings.

Bradley A Wing - July 21, 2019. - 5 out of 5

Front Lower Control Arm Bushings - Rear

“Review 1 Year Later”

Very satisfied. Had ordered other bushings that had a very light crush tube. Didnt use them and ordered the SuperPro bushings instead.

Bradley A Wing - July 21, 2019. - 5 out of 5

Universal Sway Bar End Link Kit - Adjustable 75-85mm - 10mm Ball Joint End

“excellent”

In case anyone is looking for a replacement rear sway bar end link for a 93/96 lexus GS300 this is the one to get TRC1025.

Charlie - July 18, 2019. - 5 out of 5

Polyurethane Rod - 300mm X 50mm - Duro 80

“Great product.”

Seemed to be what I needed, installed after machining, seems to be working just fine.

Wayne W Lee - July 9, 2019. - 5 out of 5

Front Lower Control Arm Bushings - Inner Position

“perfect”

installed it my self, very very easy to do, does take time, but the process is very smooth, otherwise the car feels great.

david maldonado - June 27, 2019. - 5 out of 5

Front Lower Control Arm Bushings - Inner Position

“perfect”

installed it my self, very very easy to do, does take time, but the process is very smooth, otherwise the car feels great.

david maldonado - June 27, 2019. - 5 out of 5

Front Sway Bar Bushings - 22 mm (0.86 Inch) - Measure Bar Diameter

“Well manufactured for the tough road use with an STI”

I would like to see them with a very small improvement on the stiffness.

Devere Tempro - June 22, 2019. - 5 out of 5

Rear Panhard Rod To Chassis Mount Bushing

“Review 2 Years Later”

Still working fine on 1981 Cressida.

Richard A Poulter - June 21, 2019. - 5 out of 5

Rear Lower Control Arm Bushings - Inner Position

“Review 1 Year Later”

Great kit.

John Cook - June 17, 2019. - 5 out of 5

Front Lower Control Arm Bushing - Inner Position

“Review 1 Year Later”

So far, so good. The parts seem to be very well made! I dont put a lot of miles on the car, but I have no doubt that they will continue to perform well for years to come.

John Granato - June 5, 2019. - 5 out of 5

Front Rack and Pinion Mount Bushing - For Right Hand Drive Vehicles ONLY

“Review 2 Years Later”

The bushing are working great after two years. Steering control is still tight. Bushing are not showing signs of wear.

William Black - June 4, 2019. - 5 out of 5

Front Strut Mount with Bearing

“Great compromise between comfort and performance”

I have had these installed for almost a year and they are great. They are solid but not too harsh. One thing I will say is that they will raise the front of your car to be a bit higher than it was with the crushed mounts. This is likely the true stock height.

Jonn Abshire - May 21, 2019. - 5 out of 5

Front Control Arms

“good”

Those control arms fits perfectly and where easy to install on my 2016 vw golf. They almost completely solved my big wheel-hop problem and improved handling. The only down side is that the added caster moved the wheel forwards a bit and now my tire is rubbing against the bumper when i hit a big bump (i have a 1 3/4 drop) I would have loved the same part without the added caster better but i still think Ive made a good choice. Editors Note: When modifying the ride height from OEM can cause multiple issues that could effect tire clearance, steering and handling issues. All this must be taken into consideration.

Jean-Francois Piche - May 19, 2019. - 5 out of 5

Front Motor Mount Bushings

“Good quality part, fits and works well”

I bought these as the stock GM motor mounts for my 2013 Caprice PPV were similar in price and I am always looking for an upgrade from stock when I replace anything. Very satisfied with the product, these fit exactly the same way as the stock parts and were the same dimensions from what I could tell. I have had these mounts on the car now for ~1000 miles and they are very very close to stock as far as NVH. At idle you can feel a slight vibration in the steering wheel but it is very minor, probably unnoticeable for some people. Overall these are a good buy if you want increased durability and firmness but with a stock feel.

Josh Blackwell - May 13, 2019. - 5 out of 5

Rear Sway Bar Bushings - 22 mm (0.87 inch) - Measure Bar Diameter

“Great quality oem replacement for my Land Cruiser.”

Excellent quality and fitment. knurled inner sleeve to keep grease where it needs to be. Bought a set for the front sway bar as well.

Mason Stickler - May 10, 2019. - 5 out of 5

Rear Sway Bar End Link Bushings

“Very precise fitment and High quality”

These fit perfectly and matched the oem part. Just what I was looking for! Item came with a packet of lube that was more than enough to coat all surfaces. Very satisfied with these bushings.

Mason Stickler - May 10, 2019. - 5 out of 5

Rear Lower Trailing Arm Bushings - Front Position

“Review 1 Year Later”

Very good.

Gabriel cataford - May 7, 2019. - 5 out of 5

Front Lower Control Arm Bushings - Front Position

“Very high quality”

I sold performance Auto Parts for a decade and the quality of Polyurethane bushings can be spotty. Even among one manufacturer. These by far are the best I have seen. There are grease grooves in the outer portion and the inner holes are cross-hatched to hold grease. The sleeves fit perfectly. Tolerances were tight. I installed them along with all the rest of the poly bushings available for my 2001 Volvo S40 (Mitsu Lancer CE application) and they fit great. Nobody lists them for the Volvo, but they fit the early S40. I have only had a chance to install the fronts, but understeer has been reduced while keeping ride quality. The front end feels more planted. My only complaint is that they are a bit pricey. But thats what happens when you have an "orphan" car. Im just glad someone makes them.

Kevin Bednarsky - April 26, 2019. - 4 out of 5

Rear Sway Bar Mount Bushing - 20 mm (0.78 Inch) - Measure Bar Diameter

“Very Satisfied”

I can feel my forester xt is more planted to the road. This is installed with the 20mm sway bar.

DALE O TORRES - April 23, 2019. - 5 out of 5

Front Lower Control Arm Bushings - Inner Rear Position

“Review 2 Years Later”

Bought as a replacement for my stock worn out pushing to match with my coilovers, rigid collars and end links, worked exactly as described, the handling characteristics were night and day, such an improvement over even not worn out stock bushing, would definitely recommend if looking to take your project car to the next level.

Andrew Hughes - April 23, 2019. - 5 out of 5

Front Strut Bar To Lower Control Arm Bushings

“Very satisfied and customer service was top notch”

When I contacted you guys I was in a bind I had purchased the master kit from energy suspension and this part was not included, did not know what it was really called and where I could find it, but your customer service pointed me in the right direction and was very helpful.

Anastacio Mendez Jr. - April 19, 2019. - 5 out of 5

SWAY BAR TO CHASSIS BUSH KIT

“High quality part”

If your replacing your stock bushing this is the only way to go.

Barnaby arroyo - April 15, 2019. - 5 out of 5

Universal Sway Bar End Link Kit - Adjustable 75-85mm - 10mm Ball Joint End

“High quality part.”

Much needed parts if your modding your suspension and want to be safe on the road.

Barnaby arroyo - April 15, 2019. - 5 out of 5

Universal Dust Boot

“Well made part, good customer service. Fast shipping.”

The boots were well made, heavy duty and worked well in the application saving me hundreds of dollars by not having to order new balljoints. The OEM boots had disintegrated, but the ball joints remained tight and clean, so I was lucky enough to get the universal boot. Had to do a bit of trimming to enable the smaller diameter opening to fit due to the fact that the exact size I needed was not available. The trimming was easy and the boots fit very well.

Mark Conant - April 14, 2019. - 4 out of 5

Front Differential Mount Bushings

“Nice upgrade”

A little tough to get in, not sure if anyone has ever though of making them a 2 piece/split design. But once in they are a nice fit and should last much longer than the stock rubber. These were used on a daily driven stock grand cherokee... driver is an on and off the gas kinda driver.

SETH KEARCHNER - April 11, 2019. - 5 out of 5

Rear Trailing Arm Bushings - Front Position

“Awesome”

Installation was easy and alignment was perfect.

Mike May - April 7, 2019. - 5 out of 5

Front Steering Rack and Pinion Bushing

“Good products”

High-quality products and very satisfied.

Wasim Khan - March 25, 2019. - 5 out of 5

Rear Subframe Mount Bushings

“Review 1 Year Later”

Great value and quality and design. Thanks!

Paul Hieb - March 16, 2019. - 5 out of 5

Front Steering Rack and Pinion Bushings

“Very good item fits perfectly on a 1999 toyota Altezza”

It was very easy to install them, you will only struggle to take the oem from the rack. Now the steering fells firm and precise. I really recommend them. I fitted them on a 1999 toyota altezza

Frank Salvador Cumaio - March 14, 2019. - 5 out of 5

Front Sway Bar Bushings - 34 mm (1.33 Inch) - Measure Bar Diameter

“Review 2 Years Later”

Its like I purchased it yesterday.

David Wiggan - March 5, 2019. - 5 out of 5

Steering Rack Bushings - 30mm Bracket - Passenger Side

“Excellent product. Perfect fit and reasonably priced.”

I received these bushings in three days. Super fast. I was very pleased with the bushings and the fit was perfect. The price was the best on the internet, and I will be using the company in the future. I highly recommend this product and company for your suspension needs.

Paul Moffler - February 25, 2019. - 5 out of 5

Front Strut Arm Bushings

“Review 2 Years Later”

Holding up without any concerns after 2 years of service.

the Great Potential Auto Center - February 21, 2019. - 5 out of 5

Front Lower Differential Bushings

“Great product!!”

Perfect fit and finish. Pressed old worn out bushing out and this one pressed right in for a perfect fit.

Josh Vaughan - February 12, 2019. - 5 out of 5

Rear Upper Trailing Arm Bushing

“Review 2 Years Later”

Good day.\nI have been using SuperPro bushings since 2009, the thrust bush has served for 5 years, the rear cushion thrust bushings are 10 years and serve to date. They showed excellent results during off-road operation and in the harsh Russian winter from November to March at temperatures as low as -31 F. Suspension with SuperPro bushings assembled and elastic. Payback for durability, slight wear of the metal at the points of contact with SuperPro bushings after long-term operation. For off-road use, I will choose SuperPro bushings.

Alexander Baryshev - February 8, 2019. - 5 out of 5

Rear Toe Control Arm Bushings

“Review 1 Year Later”

These parts are great no noise and still holding strong.

Daniel Rodriguez - January 31, 2019. - 5 out of 5

Front Rack and Pinion Mount Bushing - For Right Hand Drive Vehicles ONLY

“Review 1 Year Later”

Replaced 1 year ago and so far so good. Alot better than stock rubber for sure!!!

Jeremy Coffey - January 18, 2019. - 5 out of 5

Front Strut Arm Bushings

“amazing”

Great product. Easy install. Super fast shipping! I will continue to buy from here if I need more bushings.

Kevin - January 9, 2019. - 5 out of 5

Front Rack and Pinion Mount Bushing - For Right Hand Drive Vehicles ONLY

“These are a good product. Material and fit was good as expected.”

The new bushings resolved the loose play in the steering rack due to the original 10-year-old parts being worn out.

ROBERT JACKSON - December 27, 2018. - 5 out of 5

Front Steering Rack and Pinion Bushings

“Review 1 Year Later”

These bushings are fantastic. Very easy to install & changed the handling characteristics of my Land Cruiser dramatically.

John Devore - December 18, 2018. - 5 out of 5

Front Sway Bar Bushings - 24 mm (0.94 Inch) - Measure Bar Diameter

“Great product”

Great mod for my 16 wrx on the front stock sway bar, you can feel the difference.

Donald moser - December 14, 2018. - 5 out of 5

Rear Lower Trailing Arm Bushing

“great product”

Good firm material, easy to install, control of the road is great.

Russell Bass - December 9, 2018. - 5 out of 5

Rear Sway Bar Bushings - 22 mm (0.87 Inch) - Measure Bar Diameter

“Very Good”

Bushings are better than Eibach black ones. Good quality. 2008 wrx 22mm rear sway bar.

Bradford Dempsey - December 8, 2018. - 5 out of 5

Front Sway Bar Bushings - 25 mm (0.98 Inch) - Measure Bar Diameter

“Very Good”

25 mm bushing Eibach bar 2008 wrx. Bushing seems better than Eibach ones.

Bradford Dempsey - December 8, 2018. - 5 out of 5

Front Sway Bar Bushings - 24 mm (0.94 Inch) - Measure Bar Diameter

“Very Good”

2008 wrx bushing for Eibach Bar kit. Worked Great 24mm front sway bar.

Bradford Dempsey - December 8, 2018. - 5 out of 5

Rear Sway Bar End Link Kit - Adjustable 125-145mm - 10mm Ball Joint End

“Excellent product. Easy to install and performs flaulessly.”

10 out of 10. Would highly recommend. Have them installed on both my sons cars.

Bryant Williams - December 6, 2018. - 5 out of 5

Universal Sway Bar End Link Kit - Adjustable 245-305mm - 10mm Ball Joint End

“Excellent product. Easy to install and performs flaulessly.”

10 out of 10.

Bryant Williams - December 6, 2018. - 5 out of 5

Roll Center Adjusting Kit

“Excellent product.”

Great quality easy installation. a dramatic change in steering response and feel over stock.

3rd Gear Auto - December 1, 2018. - 5 out of 5

Front Sway Bar Bushings - 26 mm (1.02 inch) - Measure Bar Diameter

“Great product”

I had a clunking noise coming from the front and these solved it. I didnt want to go back with OEM rubber. They have been installed for a couple months now and still doing great.

Earl Hopper Jr - November 16, 2018. - 5 out of 5

Front Steering Rack and Pinion Bushing

“Great experience”

Great fit! Easy install! Quick delivery!

BRADLEY ALBERT - November 8, 2018. - 5 out of 5

Front Lower Control Arm Bushing - Rear Position

“Review 1 Year Later”

They are still working fine, thanks

Israel Marmolejos - October 30, 2018. - 5 out of 5

Front Engine Mount Rear Void Filler

“Review 2 Years Later”

Holding up great, with little vibration. Clutch engagement is much smoother now. Highly recommended upgrade.

chopper - October 30, 2018. - 5 out of 5

Front Strut Arm Bushings - At Chassis

“Review 2 Years Later”

Parts have held up very well under the stress of ALOT of driving. I have put about 50,000 miles on these and they are still good! Dont even squeak like topical poly bushings.

colin chambers - October 30, 2018. - 5 out of 5

Front Lower Control Arm Assembly

“Quality pieces that look great and provide better performance and reliability over the OEM replacements.”

Super easy to install. Customer service regarding all Superpro parts I have purchased has been 2nd to none. Thank you again for the support and quick shipping!

Wesley Bracken - October 15, 2018. - 5 out of 5

Rear Upper Control Arm Bushings - Inner Position

“Review 2 Years Later”

Still holding up,,no rusty,good shape.

Shui Mo - October 12, 2018. - 5 out of 5

Rear Trailing Arm Bushings - Front Position

“Review 2 Years Later”

Still holding up,no rusty,good shape.

Shui Mo - October 12, 2018. - 5 out of 5

Rear Trailing Arm Bushings - Rear Position

“Review 2 Years Later”

Still holding up,,no rusty,very good shape.

Shui Mo - October 12, 2018. - 5 out of 5

Rear Sway Bar Endlinks - Heavy Duty

“Impressed”

I was in the market for new rear endlinks and decided to give SuperPro a try. Im extremely happy that I did and will look to them for parts in the future based upon my experience thus far. \n\nThe product: Im very impressed with the quality of these endlinks...the bushings look great, the welds are smooth and neat and the rubber dust boots are at least 3x as thick as the aftermarket endlinks I am replacing ... simply put - this product looks and feels built to last. \n\nThe customer service : one of the best Ive experienced from an after market parts company - if not the best - hands down. A huge thank you to Brett Hauschild - member of the sales and tech support team. Having had a bad experience with my previously installed links (different major brand manufacturer , broke in 5,000 miles) I was pretty guarded and had questions about this product. He responded politely and informatively , bullet point by bullet point answering each question I had thoroughly and in detail. It was a real education - I was so impressed I forwarded the email to my friends to share the information provided. \n\nIt has been about 1,000 miles and all I have is satisfaction with the endlinks. Theyre quiet and perform great. Steering feel is back to tight and precise now that these are coupled with my 25mm aftermarket swaybar on my mk7 gti. The worry is gone and these links disappear into the background as I really enjoy my car now - just as things should be. \n\nI recommend this product without hesitation.

Mike - October 12, 2018. - 5 out of 5

Rear 22mm Heavy Duty 3 Point Adjustable Sway Bar

“A+”

Deciding between this and the Whiteline I decided on Superpro. Fit was perfect for my 1999 2.5rs. Recently bought this car as my project and consider it my forever car. I had read that the finish on the Superpro swaybar was superior and I have to say that is indeed true based on my prior experience with Whiteline. I have no doubt this will last the life of the car. Shipping estimate was a little off but overall Im happy.

Tyler - October 8, 2018. - 5 out of 5

Front Lower Control Arm Bushings - Inner Front Position

“Review 1 Year Later”

You get what you pay for. Quality is not cheap

Justin Hagan Senter - October 4, 2018. - 5 out of 5

Polyurethane Rod - 300mm X 50mm - Duro 80

“Great product.”

Seemed to be what I needed, installed after machining, seems to be working just fine.

Wayne W Lee - August 13, 2018. - 5 out of 5

Universal Sway Bar End Link Kit - Adjustable 245-305mm - 10mm Ball Joint End

“Very impressed”

This universal part is amazing,

eddie bruce - August 7, 2018. - 5 out of 5

Front Upper Control Arm Bushing - Inner Position

“perfect”

installed it my self, very very easy to do, does take time, but the process is very smooth, other wise the car feels great

david maldonado - July 30, 2018. - 5 out of 5

Front Lower Control Arm Bushings - Inner Position

“perfect”

installed it my self, very very easy to do, does take time, but the process is very smooth, otherwise the car feels great.

david maldonado - July 30, 2018. - 5 out of 5

Front Lower Control Arm Bushings - Front and Rear Positions

“Review 1 Year Later”

The Bushings are working great. No Squeaks!! Some people warned about squeaks with poly bushings but due to the internal knurl to hold the grease, No Squeaks. Also the front suspension feels tighter than the OEM rubber ones. I highly recommend SuperPro Bushings

Bruce Caswell - July 29, 2018. - 5 out of 5

Front Rack and Pinion Mount Bushing

“Review 1 Year Later”

Still working great! Thanks for asking.

Winnie Gilbert - July 10, 2018. - 5 out of 5

Rear Sway Bar Bushings - 18 mm (0.70 Inch) - Measure Bar Diameter

“Very satisfied!”

I needed to replace my stock sway bar bushings and wanted to upgrade from the factory rubber units. These fit perfectly and have completely eliminated the squeaking units that were on this used vehicle when I bought it... I also replaced the front end sway bar bushings with the same brand, and I am 110% satisfied with both sets!.... highly recommended. ...

Aaron T Stout - July 9, 2018. - 5 out of 5

Rear Trailing Arm Bushings - Front Position

“Excellent product”

installation is easy and performance of the bushings is outstanding also NVH is still at a comfortable low

3rd Gear Auto - June 30, 2018. - 5 out of 5

Front Lower Control Arm Bushings - Inner Rear Position

“Review 1 Year Later”

Going strong

Linda Cervantes - June 28, 2018. - 5 out of 5

Rear Lower Control Arm Bushings - Inner Position

“Review 1 Year Later”

Great kit.

John Cook - June 25, 2018. - 5 out of 5

Front Sway Bar EndLink Bushings

“Review 2 Years Later”

All is fine. Excellent.

Pavlos Franceskides - June 24, 2018. - 5 out of 5

Front Control Arms

“good”

Jean-Francois Piche - June 23, 2018. - 5 out of 5

Front Strut Arm Bushings

“Excellent quality, easy to install.”

HUGE upgrade from Stock bushings on my 2nd Gen Lexus GS 300. Night and Day difference, truly.

Eric McCann - June 19, 2018. - 5 out of 5

Front Steering - Rack and Pinion Mount Bushings - Power Steering

“Review 2 Years Later”

Still working.

Kelvin Collymore - June 16, 2018. - 5 out of 5

Front Lower Control Arm Bushing - Inner Position

“Review 1 Year Later”

So far, so good. The parts seem to be very well made! I dont put a lot of miles on the car, but I have no doubt that they will continue to perform well for years to come.

John Granato - June 1, 2018. - 5 out of 5

Front Sway Bar Bushings - 27 mm (1.06 Inch) - Measure Bar Diameter

“Review 1 Year Later”

Still feels like new! Thank you for a great product.

Craig Bull - May 27, 2018. - 5 out of 5

Front Strut Bar Bushings - To Chassis

“Great product, good fit, good road feel”

Tightened up the front end nicely. Major PAIN to install (having to lower the front engine cradle), but once all said and done the front end feels much more stable.

Donald Lightfoot - May 25, 2018. - 5 out of 5

Rear Lower Control Arm Bushings - Rear Arm - Inner Position

“Worked well”

Relatively easy to install. We have a hydraulic press onsite which makes the installation easier. Overall very happy with the product.

Allan Dale Anderson - May 25, 2018. - 5 out of 5

Steering Rack and Pinion Mount Bushing - Passenger Side

“Very good product.”

This took all the play out of my steering rack. Gave me a much better steering feel, as well as corering confidence. I would recommend this to every GTO owner. An the install is so simple.

Edward Robert Buckley - May 21, 2018. - 5 out of 5

Rear Spring Insulator - Upper Position

“Very good product.”

Helps settle the rear spring between the axle, keeps spring rate high for lowering springs, an keeps your ride comfort. Very impressed with these products.

Edward Robert Buckley - May 21, 2018. - 5 out of 5

Front Coil Spring Isolator

“Very good product.”

These sping spacers work really well for drop springs, or lowering springs. Helps increase the spring rate, an keeps the same comfort level. Overall amazing product.

Edward Robert Buckley - May 21, 2018. - 5 out of 5

Front Coil Spring Spacer Bushing

“Very good product.”

Give you better strength than stock parts, but the same comfort level.

Edward Robert Buckley - May 21, 2018. - 5 out of 5

Front Motor Mount Bushings

“Great fit, great price, fast shipping! Plus a Lifetime Warranty”

I had researched extensively after my factory hydraulic mounts failed. These mounts were the same price as the factory replacements. I was slightly concerned about increased vibration, but the NVH is very similar to the factory mounts.. The added bonus of the lifetime warranty is icing on the cake, even though I dont think I will ever have to use it since they are quality parts!

Chris Etemadi - May 16, 2018. - 5 out of 5

Rear Shock Absorber Bushings - Lower

“Very impressed with the quality of these bushings!”

Have not installed them yet but they seem to be of great quality! Shipping was fast as well. Great customer service. Will update once I have them installed.

Audeen Sundar - May 13, 2018. - 5 out of 5

Rear Lower Trailing Arm Bushings

“Amazing!”

Have not installed them yet but they seem to be of great quality! Shipping was fast as well. Great customer service. Love the turbo design. Will update once I have them installed.

Audeen Sundar - May 13, 2018. - 5 out of 5

Rear Lower Control Arm Bushings

“Very impressed with the quality of these bushing!”

Have not installed them yet but they seem to be of great quality! Shipping was fast as well. Great customer service.

Audeen Sundar - May 13, 2018. - 5 out of 5

Rear Panhard Rod Bushings

“Easy to install, great fit!”

These pan hard bushings were super simple to install after I pressed the old ones out. Once realized that the old bushing sleeve had to be removed that is.. but these bushings are fantastic quality! I had zero issues installing the pan hard bar back into my vehicle. Bolt holes lined right up. I would highly recommend!

Damon Carlisle - April 22, 2018. - 5 out of 5

Rear Blade Control Arm Bushing - Forward Position

“Review 1 Year Later”

They took a few hours to install each side. Both my stock bushing had completely failed from the blade so minimal work was needed prepping the blade for the bushing. Used a manual arbor press to put the new bushings in, which definitely took some\nMuscle. Feel is stiff which is nice. Not worried about failure anymore.

Matthew crane - April 15, 2018. - 5 out of 5

Front Lower Control Arm Bushings - Rear

“Great, loved them.”

The hardest part of installing these bushings was pressing out the old factory bushings. \nIf you dont have the proper tools, i would recommend buying the pre assembled one. \nReally easy install, was able to do it without removing the wheels. There are a couple of how-tos on youtube that really help.\nPerformance wise i wasnt dissapointed. It is a bit pricey but i would totally buy them again and again because they make that big of a difference in steering and handling. \nExtremely linear braking and steering response. With a nice set of coilovers or stiffer springs the car would be perfect.

Ryan Dang - April 8, 2018. - 5 out of 5

Front Sway Bar Endlinks

“Best Front Sway Bar Link Kit!!!”

This Front Sway Bar Link Kit is simply the best replacement you can get for the GTO.\nHeavier Duty over the stock ones, also gives you the choice with rubber bushings, or the Poly ones.\nNo other Kit gives you both Front Sway Bar Endlinks, with the choice of Bushings, GREAT BUY!!!!

Nicholas J Macchia - April 4, 2018. - 5 out of 5

Front Coil Spring Isolator

“Perfect Front Coil Spring Isolator”

I replaced my OEM plain rubber Coil Spring Isolators on My 2005 GTO, \nThis Isolator keeps it shape and makes the Front end of your vehicle sit nicely, without sagging.\nI used this Isolator, with the SPF1590AK Srut Mount.\nI am glad that these parts are available!!!\nThese parts made HUGE, Fantastic difference then the stock parts that do not hold up.\n

Nicholas J Macchia - April 4, 2018. - 5 out of 5

Front Strut Mount with Bearing

“WOW, Best Strut Mount Ive seen!!!”

Nicholas J Macchia - April 4, 2018. - 5 out of 5

Front Steering Rack and Pinion Bushings

“Great”

Installed within an hour. Easy install on 99 Land Cruiser.

Jessica l zopf - March 29, 2018. - 5 out of 5

Front Sway Bar Bushings - 26 mm (1.02 Inch) - Measure Bar Diameter

“Great”

Part was just as advertised.

Mark Davis - March 29, 2018. - 5 out of 5

Front Steering Rack and Pinion Bushings

“Great product”

Replaced the shot OEM bushings with these. Tightened the steering back up to "new" feel.

J. W. - March 22, 2018. - 5 out of 5

Front Rack and Pinion Mount Bushing - For Right Hand Drive Vehicles ONLY

“Complete kit, hard material”

Great product, fits and works perfect no more steering wheel play.

Rodolfo Rodriguez - March 18, 2018. - 5 out of 5

Rear Sway Bar End Link Kit - Adjustable 140-185mm - 12mm Ball Joint End

“Excellent product”

I actually used these links on my 2002 Jeep Wrangler for the front sway bar. The item is holding up really great ,nice product everyone.

Carl Moore - March 17, 2018. - 5 out of 5

Front Rack and Pinion Mount Bushing - For Right Hand Drive Vehicles ONLY

“Review 1 Year Later”

Replaced 1 year ago and so far so good. Alot better than stock rubber for sure!!!

Jeremy Coffey - February 26, 2018. - 5 out of 5

Front Lower Control Arm Bushings - Inner Rear Position

“Review 2 Years Later”

The Duro 3441K are holding up well. I have had no problems with them.

Francis Miller - February 26, 2018. - 5 out of 5

Front Sway Bar Bushings - 14 mm (0.55 Inch) - Measure Bar Diameter

“Review 2 Years Later”

Excellent product.

John E Grassanovits - February 9, 2018. - 5 out of 5

Front Lower Control Arm Bushings - Front Inner Position

“Awesome.”

These are very well made bushings. I used a 20-ton press with a 1" 3/16 socket to press out the old bushings, and the install is a breeze as you just lube up the bushings inside and out and stick the sleeve though them. On my stock, LCAs they fit very well with precision. The inner sleeve did take a lot of pressure to stick through the bushings! The overall impression is this is top quality materials and workmanship.

Robert Baker - January 29, 2018. - 5 out of 5

Front Lower Control Arm Bushings - Rear Inner Position

“Awesome.”

Allow me to be the first to review this fine product. This is the pinnacle of high-performance replacement bushings for the Nissan Maxima. The install went as expected by destroying the old bushing to reveal a cross-shaped sleeve. I removed the sleeve with a saws-all metal blade. I used a 1" 7/8 socket to press out the old bushings, and press in the new SuperPro SPF4151k bushings into the aluminum housing. Use the lube on the inside of the bushing as required: Good To Go. I used a 20-ton press for the bushings.

Robert Baker - January 29, 2018. - 5 out of 5

Front Lower Control Arm Bushings - Front Inner Position

“Awesome.”

Robert Baker - January 7, 2018. - 5 out of 5

Front Lower Control Arm Bushings - Rear Inner Position

“Awesome.”

Robert Baker - January 7, 2018. - 5 out of 5

Rear Differential Bushings - to Crossmember

“Quality Bushing Replacement”

My original bushings were not quite worn out yet so I did not see a lot of difference when I changed to the SuperPros, but as a replacement for the originals I have a sense these will retain their pliability and function well beyond the originals.

David Hume - December 29, 2017. - 5 out of 5

Rear Beam Axle Pivot Bushing Kit

“Awesome.”

I purchased these for my 2001 Nissan Maxima SE. I pressed them in on a rickety 3-ton press using a 3" hub socket with no problems. I didnt get either bushing perfectly centered, but the design allows for that. You center the bushing up with the ridge that runs down the length of the pivot arm. When installed correctly it looks offset, but the old one looked that way too. You will see what I mean when you look at it up close. Remember that try and evenly apply the lube to all the surfaces including in-between the two external bushings that press onto the metal sleeve because they rub together during normal operation. I was nervous about buying these because they looked funny but after talking to the SuperPro representative I realized they had a superior design. I hope this helps all those who are considering purchasing this fine product.

Robert Baker - December 27, 2017. - 5 out of 5

Front Lower Control Arm Bushings - Inner Front Position

“High quality parts”

Put these in myself , just put the 2 poly pieces in then lubed the metal tube with the clear poly lube and took a long bolt with large washer and put through metal piece then ran that in through the poly pieces put another large washer and nut on that end then got the metal piece partialy started then used my electric impact to screw the metal piece in . Very easy!

Darin Ballard - December 17, 2017. - 5 out of 5

Front Steering Rack and Pinion Bushing

“good”

The inside diameter was a 3/16th too small but it works and satisfied.\n

Kaionalani Luning - December 6, 2017. - 4 out of 5

Front Rack and Pinion Mount Bushing - For Right Hand Drive Vehicles ONLY

“Amazing”

These bushings fixed the massive issue I was having with the H3 rack. Now it drives and handles like new. Huge difference between the oem and these bad boys.

Shawn Mahoney - November 18, 2017. - 5 out of 5

Front Rack and Pinion Mount Bushing - For Right Hand Drive Vehicles ONLY

“very good quality.”

the only issue was the lip on the big bushings was backwards.Only goes one way. Had to grind them off on the bench grinder.Very good product! Editors Note: This kit is for the Right Hand drive only. That may be the reason why the lip had to be removed.

Michael Watson - November 1, 2017. - 5 out of 5

Steering Rack Bushings - 30mm Bracket - Passenger Side

“Nice quality. fair price”

Parts fit as well as the old stock ones. Good price. Very happy.

Crystal jenkins - October 4, 2017. - 5 out of 5

Front Rack and Pinion Mount Bushing

“Very good!”

Very good fitment and fast delivery!

Simen Olsen - September 24, 2017. - 5 out of 5

Front Lower Control Arm Bushings - Rear Position - Double Offset

“So far, so good”

I bought these because there currently a spherical bearing option on the market. Install is straightforward, and they fit well. Neat design allows for articulation- not usually a feature found with urethane, and the only reason Im using these! No noise so far (installed 1200 miles and 2 track days ago), so well see how they hold up!

Anthony D Walls - September 20, 2017. - 5 out of 5

Front Transmission Mount Bushings

“Very Nice”

Super impressed with the fit and finish on these. Very nice!

Danny Smith - September 5, 2017. - 5 out of 5

Front Rack and Pinion Mount Bushing

“Very well made!!! Instaling them today as a matter of fact!”

Dont have anything bad to say about them. They are great!!!!

Manuel Perez - August 26, 2017. - 5 out of 5

Rear Sway Bar Endlinks - Heavy Duty

“Excellent especially if it snows where you live.”

This part fit my 2016 VW golf R. I had purchased an aftermarket sway bar and it quickly destroyed the factory end links. These fit up well. Its important to note that unlike the competition that uses spherical end links which wear and require extensive maintanence in winter these are safer to run.

Tyler von Eggers - August 11, 2017. - 5 out of 5

Front Sway Bar Endlinks

“Review 1 Year Later”

Working like a champ, no bends or squeaks!

Kerry Williams - August 10, 2017. - 5 out of 5

Front Lower Control Arm Bushings - Rear

“Bushings were Very High Quality.”

Bushings were the Best quality I could find for the price. Installed easily with precision and No Slop what so ever. Lower Control arms Installed on vehicle with the perfect amount of tension. vehicle handles and drives very nice after installing these bushings.

Jeremiah Nettifee - August 2, 2017. - 5 out of 5

Front Lower Control Arm Bushings - Front Position

“Bushings were Very High Quality.”

Jeremiah Nettifee - August 2, 2017. - 5 out of 5

Front Sway Bar Bushings - 22 mm (0.86 Inch) - Measure Bar Diameter

“Well manufactured for the tough road use with an STI”

I would like to see them with a very small improvement on the stiffness.

Devere Tempro - July 23, 2017. - 4 out of 5

Polyurethane Rod - 300mm X 50mm - Duro 80

“Good”

Got this to make a bushing for my car, it was just as advertised.

Daniel Serrato - July 17, 2017. - 5 out of 5

Front Lower Control Arm Bushings - Front Inner Position

“Decent quality.”

Overall good fit. Would like to see some grease channels molded to inside of bushings. These parts fixed the torque steer and improved the responsiveness of the suspension. A lot of work to replace but it is worth it.

Jim Bryson - July 12, 2017. - 4 out of 5

Front Steering Rack and Pinion Bushing

“Great”

Could not find these parts locally. Glad I came across this website. Parts came fast and were perfect fit.\nWill be ordering more in the future from them.

Nathan ramroop - July 8, 2017. - 5 out of 5

Front Panhard Rod Bushing

“EXCELLENT”

I had actually purchased the entire panhard bar with the new bushings because I was not able to find just the bushings. It was costing me $400.00+. Until I found out Suspension.com. I was able to change the bushing on the panhard bar for only $42.00. Besides the savings I was really impressed by their exceptional service and professionalism. To begin with I was recommended to them by 4wheel parts of houston. A company that is a subject matter expert when it comes to 4x4 vehicles. Needless to say, Suspension.com will be our first stop when we are looking for auto parts.

ASHEESH KRISHAN - June 30, 2017. - 5 out of 5

Rear Lower Control Arm Bushings - Rear Arm - Inner Position

“Worked well”

Relatively easy to install. We have a hydraulic press onsite which makes the installation easier. Overall very happy with the product.

Allan Dale Anderson - May 21, 2017. - 5 out of 5

Front Lower Control Arm Bushings - Inner Rear Position - Anti Lift

“Review 1 Year Later”

I installed these on my 2006 Subaru Legacy GT and they are working great. I did lots of suspension mods at the same time so its hard to pinpoint exactly what affect theyve had, but Im sure theyve helped somehow. In order to fit these on my Legacy GT I had to purchase (QTY2) Subaru PN: 901370010. This is a longer stud for the front control arm, inner rear mount/bushing location, which allows the use of these bushings on vehicles, such as mine, that came equipped with a shorter version of the stud. I believe the shorter stud on my vehicle was the only reason that these are not listed as fitting the 05-09 Subaru Legacy GT (and probably some other Subarus which came with that shorter stud).

Elgin Owens - May 14, 2017. - 5 out of 5

Front Strut Bar Bushings - To Chassis

“Great product, good fit, good road feel”

Tightened up the front end nicely. Major PAIN to install (having to lower the front engine cradle), but once all said and done the front end feels much more stable.

Donald Lightfoot - May 14, 2017. - 5 out of 5

Front Steering Rack and Pinion Bushing

“Extremely good quality product”

The product is of a very good quality, am very much pleased with it.

Bobby Mannan - May 1, 2017. - 5 out of 5

Front Rack and Pinion Mount Bushing - For Right Hand Drive Vehicles ONLY

“Complete kit, hard material”

Great product, fits and works perfect no more steering wheel play.

Rodolfo Rodriguez - April 22, 2017. - 5 out of 5

Universal Dust Boot

“Look great!”

These look great, wish they were offered in more colors.

Carlos Corona - April 15, 2017. - 5 out of 5

Rear Differential Pinion Mount Bushing

“Very good”

Right part the first time and quick delivery!

Jason neil Whitney - April 7, 2017. - 5 out of 5

Front Sway Bar Bushings - 26 mm (1.02 Inch) - Measure Bar Diameter

“Great”

Part was just as advertised.

Mark Davis - March 25, 2017. - 5 out of 5

Front Strut Mount with Bearing

“On a scale of 1-10 I give them a 10”

I highly suggest purchasing these strut mounts. They are a high quality and the ride quality is much better than my poly mounts. Theyre the best of both worlds stronger than oem and softer than poly. When riding over bumps I do not hear or feel impact. I needed these fairly quickly the customer service during my purchase was excellent. I will be ordering from this company for their great products but most importantly the customer service. Editors Notes: SuperPro bushings are poly urethane. They are formulated differently than other poly manufacturers. SuperPro bushings are softer, but are just as durable.

Ulisses Maria - March 24, 2017. - 5 out of 5

Front Steering Rack and Pinion Mount Bushings - Power Steering

“High Quality Part”

Part is made from good quality material and replacement fit is perfect.

Chris - February 8, 2017. - 5 out of 5

Motor Support Bushing

“quality and fit is top notch..”

the bushings where machined perfect, installation is quick and simple using a standard bench vise and small sections of 2x4 wood. Engine response greatly improved, smoother acceleration from lights, shifts better with less "lurching" of the drive-train. Downside? slightly more engine noise and fractionally higher levels of vibration at idle in drive, but not substantial by any standard.

fadi faisal - February 1, 2017. - 5 out of 5

Rear Panhard Rod Bushing

“According to all the research Ive done online, Super Pro is the way to go for polyurethane bushings.”

I installed these on my 92 Volvo 240 without any trouble. A big shop vice and/or shop press is a must but its not hard at all. After many online hours researching bushings, Im happy with these, but only time will tell. Super Pro are supposed to be the best.

Chris Tessmer - January 3, 2017. - 5 out of 5

Front Strut Arm To Lower Control Arm Bushing

“Review 1 Year Later”

Perfect fit, excellent construction of the bushings. My mechanic had told me years ago these needed to be replaced, was happy to find a better than OEM part to install, because I really do not want to tackle this job again, and I wont have to!!!

John Grassanovits - December 12, 2016. - 5 out of 5

Front Strut Arm To Chassis Mount Bushing

“Review 1 Year Later”

Excellent fit, and best of all, will never have to replace these bushings again!!!

John Grassanovits - December 12, 2016. - 5 out of 5

Universal Sway Bar End Link Kit - Adjustable 245-305mm - 10mm Ball Joint End

“Great quality parts”

These make the oems look puny. Only wish the boots were fitted a little more snuggly. Looks like a couple were cut too short and could come off and get dirt in the joint over time. Will have to keep an eye on them. I recommend some electrical tape over the adjustment points to not beat them up when adjusting them on car.

Adam Bowling - December 10, 2016. - 5 out of 5

Front Strut Arm Bushings

“Great!”

These are a great improvement over the standard rubber bushings, plus they will probably last forever.\nCar feels and drives better than new!

James Wancha - November 19, 2016. - 5 out of 5

Rear Upper Control Arm Bushing - Rear position

“First thought when I got them was beefy”

I ordered these to replace the stock bushings on the Iron Rock Offroad rear upper control arm. I have this arm on a Jeep Liberty with a custom bracket. These bushings fit perfect, and I really wish they would have come in the arm from the beginning. They make the arm a bit stiffer and thats good. I have already given the part number to a friend who uses the same arm. I have also let a friend who is building our brackets know about these as well. Should be getting some more orders from us KJ guys.

Jack Everette - September 18, 2016. - 5 out of 5

Motor Mount Bushings - Upper Position

“Very Stiff”

Once installed, the cab vibrates a whole lot. As the other reviewer mentioned, this full performance at the expense of comfort. Good alternative for anyone looking to replace the whole stock upper mount with an expensive poly version. Perhaps a softer version would be useful for the rest of us that want a middle ground. Editors Note: Motor mount inserts fill voids in the OEM engine mounts. The OEM mounts have the voids in them to absorb the vibration. These inserts fill the voids and yes, you will feel the engine vibrate. The benefits is the engine will not move as before and eliminate wheel hop.

Chris - August 26, 2016. - 3 out of 5

Front Rack and Pinion Mount Bushing - For Right Hand Drive Vehicles ONLY

“good quality”

The directions were good and steering seems to be easier.

Paul Greer - August 21, 2016. - 5 out of 5

Front Motor Mount Bushings

“Amazing”

My old mounts are broken .. Installed Superpro .. good quality and lifetime warranty.

Z - July 22, 2016. - 5 out of 5

Front Sway Bar To Chassis Mount Bushings - 25 mm (0.98 Inch) - Measure Bar Diameter

“Great part”

Part fit great and was made very well. I have gone through 3 sets of OEM Subaru bushings this should be my last set now that I have found these bushings. Car is nice and quiet now over bumps thanks for a great part.

Todd duguay - July 2, 2016. - 5 out of 5

Rear Lower Control Arm Bushings - Rear Arm - Inner Position

“Worked well”

Relatively easy to install. We have a hydraulic press onsite which makes the installation easier. Overall very happy with the product.

Allan Dale Anderson - June 28, 2016. - 5 out of 5

Front Strut Bar Bushings - To Chassis

“Great product, good fit, good road feel”

Tightened up the front end nicely. Major PAIN to install (having to lower the front engine cradle), but once all said and done the front end feels much more stable.

Donald Lightfoot - June 20, 2016. - 5 out of 5

Rear Upper Control Arm Bushing - Rear position

“Great design”

Easy to install.

federico cerboni - June 9, 2016. - 5 out of 5

Front Steering Rack and Pinion Bushing

“Extremely good quality product”

The product is of a very good quality, am very much pleased with it.

Bobby Mannan - June 7, 2016. - 5 out of 5

Front Sway Bar Bushings - 26 mm (1.02 Inch) - Measure Bar Diameter

“Great”

Part was just as advertised.

Mark Davis - May 5, 2016. - 5 out of 5

Motor Mount Bushings - Upper Position

“Outstanding!”

Cheaper and works as good as replacing entire engine mount. Tied all my poly bushings together. Felt like it was the final piece to the puzzle. Once installed you can tell it stiffened the entire engine and transmission due to the increased vibration. Vibrates like crazy. Shifts smooth. Give up comfort for function! I love it!

Renzon Sulit - April 24, 2016. - 5 out of 5

Front Lower Control Arm Bushings - Front Position

“Great parts”

Really good quality and fit.

Irving Stein - April 11, 2016. - 5 out of 5

Front Lower Control Arm Bushings - Rear Position

“Great Bushings”

Really good fit. Not loose like the cheaper versions we have tried. Well worth the money.

Irving Stein - April 11, 2016. - 5 out of 5

Rear Lower Trailing Arm Bushings - Rear Position

“Quality Bushings”

Excellent quality and fit. Much better then the cheaper versions.

Irving Stein - April 11, 2016. - 5 out of 5

Rear Sway Bar End Link Bushings

“Great”

Company was a breeze to work with, the staff was knowledgeable and very helpful.

Justin Cowan - March 28, 2016. - 5 out of 5

Rear Lower Sway Bar End Link Bushings

“Great”

Good quality and extremely fast shipping.

Justin Cowan - March 28, 2016. - 5 out of 5

Front Transmission Mount Bushings

“Great bushings”

These were purchased for the crossmember brace for the transmission of my 1990 R32 GTR. The fit right in, and work great. \n\nThis is one of the only aftermarket kits available for the R32 GTR, and not crazy expensive either.

John Montgomery - March 12, 2016. - 5 out of 5

Motor Mount Inserts

“positive”

Installation was easy! I choose this over other brands due to durometer of the bushings. Other brands Ive seen on the forums shows them splitting due to the bushing been too stiff/rigid.